Page 1 of 1
Need help, Fry Traps
Posted: Tue Aug 10, 2010 8:50 pm
by I_Need_Zebras
About 1 to 2 years ago on here, a froum member was making custom fry traps out of acrylic, can any members remember there user ID as I need some making.
Re: Need help, Fry Traps
Posted: Fri Aug 13, 2010 1:01 pm
by Rob
Hi
I have had a quick search through the old posts to no prevail. I think your best bet would be to do a search using the above search facility and just troll through anything that comes up with "fry traps". I realise this will be a pretty long-winded way of doing it, but hopefully it will find what you are looking for.
Rob
Re: Need help, Fry Traps
Posted: Fri Aug 13, 2010 2:43 pm
by Joby
I_Need_Zebras wrote:About 1 to 2 years ago on here, a froum member was making custom fry traps out of acrylic, can any members remember there user ID as I need some making.
Was it SmithRC? he made one with an ikea spice rack which i've copied and works a treat
Re: Need help, Fry Traps
Posted: Fri Aug 13, 2010 6:28 pm
by I_Need_Zebras
It might of been SmithRC, its going back about that time. Basically it was a acrylic fry trap, all hand made with an air sponge filter and one of the ends was foam. He made loads of them for members on here and Plecofantics members. I thought it was AndrewC (Andrew Coxon) or Jamie24 but search all there posts. Will have another look this weekend.
Re: Need help, Fry Traps
Posted: Fri Aug 13, 2010 8:13 pm
by Rob
Found this. Could be the one you are looking for.
http://www.zebrapleco.com/forum/viewtop ... =19&t=4474
Rob