Need help, Fry Traps

[I_Need_Zebras]

About 1 to 2 years ago on here, a froum member was making custom fry traps out of acrylic, can any members remember there user ID as I need some making.

[Rob]

Hi

I have had a quick search through the old posts to no prevail. I think your best bet would be to do a search using the above search facility and just troll through anything that comes up with "fry traps". I realise this will be a pretty long-winded way of doing it, but hopefully it will find what you are looking for.

Rob

[Joby]

About 1 to 2 years ago on here, a froum member was making custom fry traps out of acrylic, can any members remember there user ID as I need some making.

Was it SmithRC? he made one with an ikea spice rack which i've copied and works a treat

[I_Need_Zebras]

It might of been SmithRC, its going back about that time. Basically it was a acrylic fry trap, all hand made with an air sponge filter and one of the ends was foam. He made loads of them for members on here and Plecofantics members. I thought it was AndrewC (Andrew Coxon) or Jamie24 but search all there posts. Will have another look this weekend.

[Rob]

Found this. Could be the one you are looking for.

http://www.zebrapleco.com/forum/viewtop ... =19&t=4474

Rob