Do your own frytrap easy and good

Anything from making a cave, to building a fishroom, this is the place to post.
Post Reply
Edlund
Moderator
Posts: 190
Joined: Fri Oct 20, 2006 10:04 pm
Location: Sweden

Do your own frytrap easy and good

Post by Edlund »

tools:

petbox size M
a piece of filtermat 3cm fine
2 sucker with a head
multitool with a cutter
multitool with a drill
spongefilter for filtration



step 1. Connect the cutter and start to cut on side of the plastic box 2 cm from the edge

step 2. Clean the edges with a knife or your fingers for melted plastic ( can hurt the fries beacause it's sharp)

step 3. Connect the drill and cut 2 holes 4-5cm from the edges in both sides.

step 4. Make shure that the holes are smaller than the head of the suckers head ( if they arent they wont fit)

step 5. Put the 2 suckers in.

step 6. Now take a piece of filtermat and cut in so it cover the whole side (2cm wider than the cutting of the side of the plastic box)

step 7. Take the 3cm filtermat and cut i in half.

step 8. Cut now the smaller piece 1cm deep (its for the edges of the plastic box).

step 9. Clap yourself on the shoulder beacuse u know are ready :)

Image
Image
Image
Image
Image
Image
Image
Image
Image
Jo's Zebs
Moderator
Posts: 573
Joined: Wed Nov 22, 2006 7:12 pm
Location: Cheshire UK
Contact:

Post by Jo's Zebs »

Nice job Ed :) :)
L number plecos and pleco products worldwide delivery www.rareaquatics.co.uk
smithrc
Moderator
Posts: 862
Joined: Wed Jun 08, 2005 3:57 pm
Location: Milton Keynes - UK
Contact:

Post by smithrc »

looking good :)
Click For Our Plecs
[url=http://www.smithrc.f2s.com/gallery/plecs][img]http://www.smithrc.f2s.com/assorted/PlecSig_sm.jpg[/img][/url]
Edlund
Moderator
Posts: 190
Joined: Fri Oct 20, 2006 10:04 pm
Location: Sweden

Post by Edlund »

Well i have only this type o frytraps and they are easy to do and the fries are doing great :)
Post Reply