Oxygen gadget (home made)!!!

Anything from making a cave, to building a fishroom, this is the place to post.
Post Reply
User avatar
madmoroccan
Obsessed!!
Posts: 323
Joined: Thu Feb 16, 2006 6:21 pm
Location: Hertfordshire, UK

Oxygen gadget (home made)!!!

Post by madmoroccan » Mon Apr 17, 2006 7:26 pm

I have made an oxygen circulation system using:

> Small airstone
> Cheap internal water filter (in this case interpret PF mini)
> Spare airline from an air pump
> Possibly an undergravel filter to help with the circulation (all will become apparent)

I am currently using this system in my community tank... A beta test so to speak... I am monitoring oxygen levels in the tank and will post the results once I have about 2 weeks worth of tests. Initially this system seems to be doing the job...

Stats:
temp: 28.9 degrees C
ph: 7.1
hardness: HARD (Treated tap water)

I will post video clips later tonight when I get back.
[img]http://www.geocities.com/madmoroccan/zebcam.jpg[/img]

User avatar
khblock
Obsessed!!
Posts: 150
Joined: Mon Jan 16, 2006 4:40 am
Location: Columbus, GA USA
Contact:

Post by khblock » Mon Apr 17, 2006 8:37 pm

I'd be interested in your results. Oh, don't forget pictures. :wink:
http://www.blockstyle.com
http://www.bestfriends.com
http://worldwildlifefund.org
http://www.oceanconservancy.org

User avatar
Raul-7
Obsessed!!
Posts: 248
Joined: Fri Jan 06, 2006 8:38 pm
Location: Lomita, CA

Post by Raul-7 » Mon Apr 17, 2006 11:01 pm

How will you be measuring O2 levels? I would recommend the Salifert O2 test or even better, a digital meter (but that's way out of many people's price range).

Is there some sort of control tank? It would be nice to compare gas exchange via aeration vs powerhead pointed towards surface vs none at all.

Lastly, O2 levels at 28.9 C will be much different at 30-31.


Good luck with the experiment and we're waiting for the results! :D

User avatar
madmoroccan
Obsessed!!
Posts: 323
Joined: Thu Feb 16, 2006 6:21 pm
Location: Hertfordshire, UK

Post by madmoroccan » Thu Apr 20, 2006 10:16 am

Hi guys sorry bout the long delay... I am experiencing technical difficulties, my digicam has packed in... And am not sure that the oxygen test kit's results are reliable either!

Anyhow, I will take some photos on my cam-phone which although not great will be adequate.
[img]http://www.geocities.com/madmoroccan/zebcam.jpg[/img]

User avatar
Raul-7
Obsessed!!
Posts: 248
Joined: Fri Jan 06, 2006 8:38 pm
Location: Lomita, CA

Post by Raul-7 » Thu Apr 20, 2006 9:01 pm

I think the actual measure of dissolved oxygen in their native habitat is overstated. There's something to keep in mind that pressure and temperature are inversely proportional to the amount of dissolved gas.

At 1atm, and at 28.9C - the maximum amount of dissolved oxygen achievable is 7.6ppm.

At 1atm, and at 30C - the maximum is 7.4ppm.

Of course it's almost impossible to reach 100% saturation without the use of plants and CO2; thus I believe the level to aim for is around 5ppm.

User avatar
madmoroccan
Obsessed!!
Posts: 323
Joined: Thu Feb 16, 2006 6:21 pm
Location: Hertfordshire, UK

Post by madmoroccan » Wed Apr 26, 2006 2:59 am

sorry this has taken so long in the middle of doing ten things at once I finally remembered this post. I am currently working on a diagram to show the internal workings of this concoction... :lol: :lol: :lol:

I am really hopeful that it is effective... The initial signs look good... there are thousands of tiny bubbles everywhere inside the tank, and it seem as if the oxygen has hit saturation point... I have lots of big bubbles on the surface... almost like foam... :twisted: :twisted: :twisted:

Still, the only way to find out is to test. I will post these results once I get my hands on the relevant test kit.

Bader
[img]http://www.geocities.com/madmoroccan/zebcam.jpg[/img]

Post Reply